Share:


Omron Proximity Sensor Photosensor E2K-C25MY1

Sensing head size 34 dia.
Type Cylinder type, Capacitive type, Unshielded
Power source AC 2-wire models
Sensing distance 25 mm
Setting distance 3 to 25 mm
Differential distance 15% max. of sensing distance (when adjusted to 25 mm ±10% with standard object)
Sensing object Conductor and dielectrics
Standard sensing object With grounded metal 50 x 50 x 1 mm
Response frequency 10 Hz (Average value)
Power supply voltage 100 to 220 VAC
Operating voltage range 90 to 250 VAC
Leakage current at 100 VAC 50/60 Hz: 1 mA max.
at 200 VAC 50/60 Hz: 2 mA max.
Control output (Switching capacity) Resistive load: 5 to 200 mA
Indicator Operation indicator (red)
Operation mode NO
Sensitivity setting Sensitivity adjuster
Protective circuit Surge suppressor
Ambient temperature (Operating) -25 to 70 ℃
Ambient temperature (Storage) -25 to 70 ℃
Ambient humidity (Operating) 35 to 95% RH
Ambient humidity (Storage) 35 to 95% RH
Temperature influence ±15% max. of sensing distance at 23 ℃ in the temperature range of −10 to 55 ℃
±25% max. of sensing distance at 23 ℃ in the temperature range of −25 to 70 ℃
Voltage influence ±2% max. of sensing distance at the rated voltage in rated voltage +20%, −10% range at 100 VAC, ±20% range at 200 VAC
Insulation resistance Between charged parts and the case: 5 MΩ min. at 500 VDC
Dielectric strength Between charged parts and the case: 1,500 VAC 50/60 Hz 1 min
Vibration resistance Destruction: 10 to 55 Hz, 1.5 mm double amplitude each in X, Y, and Z directions for 2 h
Shock resistance Destruction: 500 m/s2 10 times each in X, Y, and Z directions
Degree of protection IEC: IP66
Connection method Pre-wired models (2 m)
Weight Package: Approx. 200 g
Material Case: Heat-resistant ABS resin
Sensing surface: Heat-resistant ABS resin
Accessories Instruction manual, Dedicated fixture, M4 screws


 Inquiry - Omron Proximity Sensor Photosensor E2K-C25MY1